The documentation for the ExtReact product diverges somewhat from the
documentation of other Sencha products. The sections below describe
documentation for all products except where indicated as unique to
ExtReact.
Many classes have shortcut names used when creating (instantiating) a class with a
configuration object. The shortcut name is referred to as an alias (or xtype if the
class extends Ext.Component). The alias/xtype is listed next to the class name of
applicable classes for quick reference.
ExtReact component classes list the configurable name prominently at the top of the API class doc followed by the fully-qualified class name.
Framework classes or their members may be specified as private or protected. Else,
the class / member is public. Public, protected, and private are access
descriptors used to convey how and when the class or class member should be used.
Public classes and class members are available for use by any other class or application code and may be relied upon as a stable and persistent within major product versions. Public classes and members may safely be extended via a subclass.
Protected class members are stable public members intended to be used by the
owning class or its subclasses. Protected members may safely be extended via a subclass.
Private classes and class members are used internally by the framework and are not intended to be used by application developers. Private classes and members may change or be omitted from the framework at any time without notice and should not be relied upon in application logic.
ExtReact component classes display
configuration options as props
ExtReact component classes do not list
properties as a dedicated member type, but rather as
read only props
static label next to the
method name. *See Static below.Below is an example class member that we can disect to show the syntax of a class member (the lookupComponent method as viewed from the Ext.button.Button class in this case).
Let's look at each part of the member row:
lookupComponent in this example)( item ) in this example)Ext.Component in this case). This may be omitted for methods that do not
return anything other than undefined or may display as multiple possible values
separated by a forward slash / signifying that what is returned may depend on the
results of the method call (i.e. a method may return a Component if a get method calls is
successful or false if unsuccessful which would be displayed as
Ext.Component/Boolean).PROTECTED in
this example - see the Flags section below)Ext.container.Container in this example). The source
class will be displayed as a blue link if the member originates from the current class
and gray if it is inherited from an ancestor or mixed-in class.view source in the example)item : Object in the example).undefined a "Returns" section
will note the type of class or object returned and a description (Ext.Component in the
example)Available since 3.4.0 - not pictured in
the example) just after the member descriptionDefaults to: false)The API documentation uses a number of flags to further commnicate the class member's function and intent. The label may be represented by a text label, an abbreviation, or an icon.
All ExtReact props are bindable
unless decorated as immutable
Immutable ExtReact props may not be use as a configurable prop when instantiating a component
classInstance.method1().method2().etc();false is returned from
an event handler- Indicates a framework class
- A singleton framework class. *See the singleton flag for more information
- A component-type framework class (any class within the Ext JS framework that extends Ext.Component)
- Indicates that the class, member, or guide is new in the currently viewed version
- Indicates a class member of type config
Or in the case of an ExtReact component class this
indicates a member of type prop
- Indicates a class member of type property
- Indicates a class member of type
method
- Indicates a class member of type event
- Indicates a class member of type
theme variable
- Indicates a class member of type
theme mixin
- Indicates that the class, member, or guide is new in the currently viewed version
Just below the class name on an API doc page is a row of buttons corresponding to the types of members owned by the current class. Each button shows a count of members by type (this count is updated as filters are applied). Clicking the button will navigate you to that member section. Hovering over the member-type button will reveal a popup menu of all members of that type for quick navigation.
Getting and setter methods that correlate to a class config option will show up in the methods section as well as in the configs section of both the API doc and the member-type menus just beneath the config they work with. The getter and setter method documentation will be found in the config row for easy reference.
ExtReact component classes do not hoist the getter /
setter methods into the prop. All methods will be described in the
Methods section
Your page history is kept in localstorage and displayed (using the available real estate) just below the top title bar. By default, the only search results shown are the pages matching the product / version you're currently viewing. You can expand what is displayed by clicking on the button on the right-hand side of the history bar and choosing the "All" radio option. This will show all recent pages in the history bar for all products / versions.
Within the history config menu you will also see a listing of your recent page visits. The results are filtered by the "Current Product / Version" and "All" radio options. Clicking on the button will clear the history bar as well as the history kept in local storage.
If "All" is selected in the history config menu the checkbox option for "Show product details in the history bar" will be enabled. When checked, the product/version for each historic page will show alongside the page name in the history bar. Hovering the cursor over the page names in the history bar will also show the product/version as a tooltip.
Both API docs and guides can be searched for using the search field at the top of the page.
On API doc pages there is also a filter input field that filters the member rows using the filter string. In addition to filtering by string you can filter the class members by access level, inheritance, and read only. This is done using the checkboxes at the top of the page.
The checkbox at the bottom of the API class navigation tree filters the class list to include or exclude private classes.
Clicking on an empty search field will show your last 10 searches for quick navigation.
Each API doc page (with the exception of Javascript primitives pages) has a menu view of metadata relating to that class. This metadata view will have one or more of the following:
Ext.button.Button class has an alternate class name of Ext.Button). Alternate class
names are commonly maintained for backward compatibility.Runnable examples (Fiddles) are expanded on a page by default. You can collapse and expand example code blocks individually using the arrow on the top-left of the code block. You can also toggle the collapse state of all examples using the toggle button on the top-right of the page. The toggle-all state will be remembered between page loads.
Class members are collapsed on a page by default. You can expand and collapse members using the arrow icon on the left of the member row or globally using the expand / collapse all toggle button top-right.
Viewing the docs on narrower screens or browsers will result in a view optimized for a smaller form factor. The primary differences between the desktop and "mobile" view are:
The class source can be viewed by clicking on the class name at the top of an API doc page. The source for class members can be viewed by clicking on the "view source" link on the right-hand side of the member row.
Represents a read or write operation performed by a Ext.data.proxy.Proxy. Operation objects are used to enable communication between Stores and Proxies. Application developers should rarely need to interact with Operation objects directly.
Several Operations can be batched together in a Ext.data.Batch.
Function to execute when operation completed.
Defaults to:
undefined
records : Ext.data.Model[]
Array of records.
operation : Ext.data.operation.Operation
The Operation itself.
success : Boolean
True when operation completed successfully.
A callback to run before the callback.
Defaults to:
null
Sets the value of internalCallback
internalCallback : Function
Parameters to pass along with the request when performing the operation.
Defaults to:
undefined
Passed to the reader, see Ext.data.reader.Reader#read
Defaults to:
null
Sets the value of recordCreator
recordCreator : Function
The records associated with this operation. If this is a read operation, this will be
null until data is returned from the Ext.data.proxy.Proxy.
Defaults to:
null
Returns the Ext.data.Models associated with this operation. For read
operations the records as set by the Ext.data.proxy.Proxy will be
returned (returns null if the proxy has not yet set the records).
For create, update, and destroy operations the operation's initially configured records will be returned, although the proxy may modify these records' data at some point after the operation is initialized.
True if this Operation is to be executed synchronously. This property is inspected by a Ext.data.Batch to see if a series of Operations can be executed in parallel or not.
Defaults to:
false
The value true causes config values to be stored on instances using a
property name prefixed with an underscore ("_") character. A value of false
stores config values as properties using their exact name (no prefix).
Defaults to:
true
Available since: 5.0.0
The value true instructs the initConfig method to only honor values for
properties declared in the config block of a class. When false, properties
that are not declared in a config block will be placed on the instance.
Defaults to:
true
Available since: 5.0.0
A prototype-chained object storing transform method names and priorities stored on the class prototype. On first instantiation, this object is converted into an array that is sorted by priority and stored on the constructor.
Defaults to:
{}
Setting this property to false will prevent nulling object references
on a Class instance after destruction. Setting this to "async" will delay
the clearing for approx 50ms.
Defaults to:
true
Available since: 6.2.0
Setting this property to true will result in setting the object's
prototype to null after the destruction sequence is fully completed.
After that, most attempts at calling methods on the object instance
will result in "method not defined" exception. This can be very helpful
with tracking down otherwise hard to find bugs like runaway Ajax requests,
timed functions not cleared on destruction, etc.
Note that this option can only work in browsers that support Object.setPrototypeOf
method, and is only available in debugging mode.
Defaults to:
false
Available since: 6.2.0
This private object is used to save on memory allocation. This instance is used to apply server record updates as part of a record commit performed by calling the set() method on the record. See doProcess.
Defaults to:
true
This property is set to true after the destroy method is called.
Defaults to:
false
The error object passed when setException was called. This could be any object or primitive.
Defaults to:
undefined
The exception status of this Operation. Use hasException and see getError.
Defaults to:
false
This number is used by Ext.data.Batch#sort to order operations of the
same type. This value is multipled by the "entity rank" (which is determined by
foreign-key dependencies) to invert the direction of the sort based on the type of
operation. Only Ext.data.operation.Destroy overrides this value.
Defaults to:
1
Available since: 5.0.0
This property is set to true during the call to initConfig.
Defaults to:
false
Available since: 5.0.0
This property is set to true if this instance is the first of its class.
Defaults to:
false
Available since: 5.0.0
This value is true and is used to identify plain objects from instances of
a defined class.
Defaults to:
true
This number is used by Ext.data.Batch#sort to order operations. Order of
operations of the same type is determined by foreign-key dependencies. The array of
operations is sorted by ascending (increasing) values of order.
Defaults to:
0
Available since: 5.0.0
Get the reference to the current class from which this object was instantiated. Unlike
Ext.Base#statics, this.self is scope-dependent and it's meant to be used
for dynamic inheritance. See Ext.Base#statics for a detailed comparison
Ext.define('My.Cat', {
statics: {
speciesName: 'Cat' // My.Cat.speciesName = 'Cat'
},
constructor: function() {
alert(this.self.speciesName); // dependent on 'this'
},
clone: function() {
return new this.self();
}
});
Ext.define('My.SnowLeopard', {
extend: 'My.Cat',
statics: {
speciesName: 'Snow Leopard' // My.SnowLeopard.speciesName = 'Snow Leopard'
}
});
var cat = new My.Cat(); // alerts 'Cat'
var snowLeopard = new My.SnowLeopard(); // alerts 'Snow Leopard'
var clone = snowLeopard.clone();
alert(Ext.getClassName(clone)); // alerts 'My.SnowLeopard'
Defaults to:
Base
Whether the Operation was successful or not. This starts as undefined and is set to true or false by the Proxy that is executing the Operation. It is also set to false by setException. Use wasSuccessful to query success status.
Defaults to:
undefined
Aborts the processing of this operation on the proxy. This is only valid for proxies that make asynchronous requests.
This method applies a versioned, deprecation declaration to this class. This
is typically called by the deprecated config.
deprecations : Object
Checks whether this operation should cause writing to occur.
Whether the operation should cause a write to occur.
Call the original method that was previously overridden with Ext.Base#override
Ext.define('My.Cat', {
constructor: function() {
alert("I'm a cat!");
}
});
My.Cat.override({
constructor: function() {
alert("I'm going to be a cat!");
this.callOverridden();
alert("Meeeeoooowwww");
}
});
var kitty = new My.Cat(); // alerts "I'm going to be a cat!"
// alerts "I'm a cat!"
// alerts "Meeeeoooowwww"
args : Array/Arguments
The arguments, either an array or the arguments object
from the current method, for example: this.callOverridden(arguments)
Returns the result of calling the overridden method
Deprecated since version 4.1.0
Use method-callParent instead.
Call the "parent" method of the current method. That is the method previously overridden by derivation or by an override (see Ext#define).
Ext.define('My.Base', {
constructor: function(x) {
this.x = x;
},
statics: {
method: function(x) {
return x;
}
}
});
Ext.define('My.Derived', {
extend: 'My.Base',
constructor: function() {
this.callParent([21]);
}
});
var obj = new My.Derived();
alert(obj.x); // alerts 21
This can be used with an override as follows:
Ext.define('My.DerivedOverride', {
override: 'My.Derived',
constructor: function(x) {
this.callParent([x*2]); // calls original My.Derived constructor
}
});
var obj = new My.Derived();
alert(obj.x); // now alerts 42
This also works with static and private methods.
Ext.define('My.Derived2', {
extend: 'My.Base',
// privates: {
statics: {
method: function(x) {
return this.callParent([x*2]); // calls My.Base.method
}
}
});
alert(My.Base.method(10)); // alerts 10
alert(My.Derived2.method(10)); // alerts 20
Lastly, it also works with overridden static methods.
Ext.define('My.Derived2Override', {
override: 'My.Derived2',
// privates: {
statics: {
method: function(x) {
return this.callParent([x*2]); // calls My.Derived2.method
}
}
});
alert(My.Derived2.method(10); // now alerts 40
To override a method and replace it and also call the superclass method, use method-callSuper. This is often done to patch a method to fix a bug.
args : Array/Arguments
The arguments, either an array or the arguments object
from the current method, for example: this.callParent(arguments)
Returns the result of calling the parent method
This method is used by an override to call the superclass method but bypass any overridden method. This is often done to "patch" a method that contains a bug but for whatever reason cannot be fixed directly.
Consider:
Ext.define('Ext.some.Class', {
method: function() {
console.log('Good');
}
});
Ext.define('Ext.some.DerivedClass', {
extend: 'Ext.some.Class',
method: function() {
console.log('Bad');
// ... logic but with a bug ...
this.callParent();
}
});
To patch the bug in Ext.some.DerivedClass.method, the typical solution is to create an
override:
Ext.define('App.patches.DerivedClass', {
override: 'Ext.some.DerivedClass',
method: function() {
console.log('Fixed');
// ... logic but with bug fixed ...
this.callSuper();
}
});
The patch method cannot use method-callParent to call the superclass
method since that would call the overridden method containing the bug. In
other words, the above patch would only produce "Fixed" then "Good" in the
console log, whereas, using callParent would produce "Fixed" then "Bad"
then "Good".
args : Array/Arguments
The arguments, either an array or the arguments object
from the current method, for example: this.callSuper(arguments)
Returns the result of calling the superclass method
Creates new Operation object.
config : Object (optional)
Config object.
This method is called to cleanup an object and its resources. After calling this method, the object should not be used any further in any way, including access to its methods and properties.
To prevent potential memory leaks, all object references will be nulled
at the end of destruction sequence, unless clearPropertiesOnDestroy
is set to false.
Destroys member properties by name.
If a property name is the name of a config, the getter is not invoked, so if the config has not been initialized, nothing will be done.
The property will be destroyed, and the corrected name (if the property is a config
and config names are prefixed) will set to null in this object's dictionary.
args : String...
One or more names of the properties to destroy and remove from the object.
Process records in the operation after the response is successful and the result set is parsed correctly. The base class implementation of this method is used by "create" and "update" operations to allow the server response to update the client side records.
resultSet : Ext.data.ResultSet
The result set
request : Ext.data.Request
The request
response : Object
The response
Executes the operation on the configured proxy.
The request object
Returns a specified config property value. If the name parameter is not passed, all current configuration options will be returned as key value pairs.
name : String (optional)
The name of the config property to get.
peek : Boolean (optional)
true to peek at the raw value without calling the getter.
Defaults to: false
ifInitialized : Boolean (optional)
true to only return the initialized property
value, not the raw config value, and not to trigger initialization. Returns
undefined if the property has not yet been initialized.
Defaults to: false
The config property value.
Returns the error string or object that was set using setException
The error object
Returns the initial configuration passed to the constructor when instantiating this class.
Given this example Ext.button.Button definition and instance:
Ext.define('MyApp.view.Button', {
extend: 'Ext.button.Button',
xtype: 'mybutton',
scale: 'large',
enableToggle: true
});
var btn = Ext.create({
xtype: 'mybutton',
renderTo: Ext.getBody(),
text: 'Test Button'
});
Calling btn.getInitialConfig() would return an object including the config
options passed to the create method:
xtype: 'mybutton',
renderTo: // The document body itself
text: 'Test Button'
Calling btn.getInitialConfig('text')returns 'Test Button'.
name : String (optional)
Name of the config option to return.
The full config object or a single config value
when name parameter specified.
Returns true if this Operation encountered an exception (see also getError)
True if there was an exception
Initialize configuration for this class. a typical example:
Ext.define('My.awesome.Class', {
// The default config
config: {
name: 'Awesome',
isAwesome: true
},
constructor: function(config) {
this.initConfig(config);
}
});
var awesome = new My.awesome.Class({
name: 'Super Awesome'
});
alert(awesome.getName()); // 'Super Awesome'
instanceConfig : Object
this
Returns true if the Operation has been completed
True if the Operation is complete
Returns true if the Operation has been started but has not yet completed.
True if the Operation is currently running
Returns true if the Operation has been started. Note that the Operation may have started AND completed, see isRunning to test if the Operation is currently running.
True if the Operation has started
Adds a "destroyable" object to an internal list of objects that will be destroyed
when this instance is destroyed (via destroy).
name : String
value : Object
The value passed.
Sets a single/multiple configuration options.
name : String/Object
The name of the property to set, or a set of key value pairs to set.
value : Object (optional)
The value to set for the name parameter.
this
Marks the Operation as having experienced an exception. Can be supplied with an option error message/object.
error : String/Object (optional)
error string/object
Marks the Operation as successful.
complete : Boolean (optional)
true to also mark this operation
as being complete See setCompleted.
Get the reference to the class from which this object was instantiated. Note that unlike
Ext.Base#self, this.statics() is scope-independent and it always returns
the class from which it was called, regardless of what this points to during run-time
Ext.define('My.Cat', {
statics: {
totalCreated: 0,
speciesName: 'Cat' // My.Cat.speciesName = 'Cat'
},
constructor: function() {
var statics = this.statics();
// always equals to 'Cat' no matter what 'this' refers to
// equivalent to: My.Cat.speciesName
alert(statics.speciesName);
alert(this.self.speciesName); // dependent on 'this'
statics.totalCreated++;
},
clone: function() {
var cloned = new this.self(); // dependent on 'this'
// equivalent to: My.Cat.speciesName
cloned.groupName = this.statics().speciesName;
return cloned;
}
});
Ext.define('My.SnowLeopard', {
extend: 'My.Cat',
statics: {
speciesName: 'Snow Leopard' // My.SnowLeopard.speciesName = 'Snow Leopard'
},
constructor: function() {
this.callParent();
}
});
var cat = new My.Cat(); // alerts 'Cat', then alerts 'Cat'
var snowLeopard = new My.SnowLeopard(); // alerts 'Cat', then alerts 'Snow Leopard'
var clone = snowLeopard.clone();
alert(Ext.getClassName(clone)); // alerts 'My.SnowLeopard'
alert(clone.groupName); // alerts 'Cat'
alert(My.Cat.totalCreated); // alerts 3
Destroys a given set of linked objects. This is only needed if
the linked object is being destroyed before this instance.
names : String[]
The names of the linked objects to destroy.
this
Returns true if the Operation has completed and was successful
True if successful
Watches config properties.
instance.watchConfig({
title: 'onTitleChange',
scope: me
});
Available since: 6.7.0
name : Object
fn : Object
scope : Object
Adds new config properties to this class. This is called for classes when they are declared, then for any mixins that class may define and finally for any overrides defined that target the class.
config : Object
mixinClass : Ext.Class (optional)
The mixin class if the configs are from a mixin.
name : Object
member : Object
privacy : Object
Add methods / properties to the prototype of this class.
Ext.define('My.awesome.Cat', {
constructor: function() {
...
}
});
My.awesome.Cat.addMembers({
meow: function() {
alert('Meowww...');
}
});
var kitty = new My.awesome.Cat();
kitty.meow();
members : Object
The members to add to this class.
isStatic : Boolean (optional)
Pass true if the members are static.
Defaults to: false
privacy : Boolean (optional)
Pass true if the members are private. This
only has meaning in debug mode and only for methods.
Defaults to: false
Add / override static properties of this class.
Ext.define('My.cool.Class', {
...
});
My.cool.Class.addStatics({
someProperty: 'someValue', // My.cool.Class.someProperty = 'someValue'
method1: function() { ... }, // My.cool.Class.method1 = function() { ... };
method2: function() { ... } // My.cool.Class.method2 = function() { ... };
});
members : Object
this
Borrow another class' members to the prototype of this class.
Ext.define('Bank', {
money: '$$$',
printMoney: function() {
alert('$$$$$$$');
}
});
Ext.define('Thief', {
...
});
Thief.borrow(Bank, ['money', 'printMoney']);
var steve = new Thief();
alert(steve.money); // alerts '$$$'
steve.printMoney(); // alerts '$$$$$$$'
fromClass : Ext.Base
The class to borrow members from
members : Array/String
The names of the members to borrow
this
Create a new instance of this Class.
Ext.define('My.cool.Class', {
...
});
My.cool.Class.create({
someConfig: true
});
All parameters are passed to the constructor of the class.
the created instance.
Create aliases for existing prototype methods. Example:
Ext.define('My.cool.Class', {
method1: function() { ... },
method2: function() { ... }
});
var test = new My.cool.Class();
My.cool.Class.createAlias({
method3: 'method1',
method4: 'method2'
});
test.method3(); // test.method1()
My.cool.Class.createAlias('method5', 'method3');
test.method5(); // test.method3() -> test.method1()
alias : String/Object
The new method name, or an object to set multiple aliases. See flexSetter
origin : String/Object
The original method name
Returns the Ext.Configurator for this class.
Get the current class' name in string format.
Ext.define('My.cool.Class', {
constructor: function() {
alert(this.self.getName()); // alerts 'My.cool.Class'
}
});
My.cool.Class.getName(); // 'My.cool.Class'
className
Used internally by the mixins pre-processor
name : Object
mixinClass : Object
Override members of this class. Overridden methods can be invoked via callParent.
Ext.define('My.Cat', {
constructor: function() {
alert("I'm a cat!");
}
});
My.Cat.override({
constructor: function() {
alert("I'm going to be a cat!");
this.callParent(arguments);
alert("Meeeeoooowwww");
}
});
var kitty = new My.Cat(); // alerts "I'm going to be a cat!"
// alerts "I'm a cat!"
// alerts "Meeeeoooowwww"
Direct use of this method should be rare. Use Ext.define instead:
Ext.define('My.CatOverride', {
override: 'My.Cat',
constructor: function() {
alert("I'm going to be a cat!");
this.callParent(arguments);
alert("Meeeeoooowwww");
}
});
The above accomplishes the same result but can be managed by the Ext.Loader which can properly order the override and its target class and the build process can determine whether the override is needed based on the required state of the target class (My.Cat).
members : Object
The properties to add to this class. This should be specified as an object literal containing one or more properties.
this class
ExtWebComponents | Terms of Use