The documentation for the ExtReact product diverges somewhat from the
documentation of other Sencha products. The sections below describe
documentation for all products except where indicated as unique to
ExtReact.
Many classes have shortcut names used when creating (instantiating) a class with a
configuration object. The shortcut name is referred to as an alias (or xtype if the
class extends Ext.Component). The alias/xtype is listed next to the class name of
applicable classes for quick reference.
ExtReact component classes list the configurable name prominently at the top of the API class doc followed by the fully-qualified class name.
Framework classes or their members may be specified as private or protected. Else,
the class / member is public. Public, protected, and private are access
descriptors used to convey how and when the class or class member should be used.
Public classes and class members are available for use by any other class or application code and may be relied upon as a stable and persistent within major product versions. Public classes and members may safely be extended via a subclass.
Protected class members are stable public members intended to be used by the
owning class or its subclasses. Protected members may safely be extended via a subclass.
Private classes and class members are used internally by the framework and are not intended to be used by application developers. Private classes and members may change or be omitted from the framework at any time without notice and should not be relied upon in application logic.
ExtReact component classes display
configuration options as props
ExtReact component classes do not list
properties as a dedicated member type, but rather as
read only props
static label next to the
method name. *See Static below.Below is an example class member that we can disect to show the syntax of a class member (the lookupComponent method as viewed from the Ext.button.Button class in this case).
Let's look at each part of the member row:
lookupComponent in this example)( item ) in this example)Ext.Component in this case). This may be omitted for methods that do not
return anything other than undefined or may display as multiple possible values
separated by a forward slash / signifying that what is returned may depend on the
results of the method call (i.e. a method may return a Component if a get method calls is
successful or false if unsuccessful which would be displayed as
Ext.Component/Boolean).PROTECTED in
this example - see the Flags section below)Ext.container.Container in this example). The source
class will be displayed as a blue link if the member originates from the current class
and gray if it is inherited from an ancestor or mixed-in class.view source in the example)item : Object in the example).undefined a "Returns" section
will note the type of class or object returned and a description (Ext.Component in the
example)Available since 3.4.0 - not pictured in
the example) just after the member descriptionDefaults to: false)The API documentation uses a number of flags to further commnicate the class member's function and intent. The label may be represented by a text label, an abbreviation, or an icon.
All ExtReact props are bindable
unless decorated as immutable
Immutable ExtReact props may not be use as a configurable prop when instantiating a component
classInstance.method1().method2().etc();false is returned from
an event handler- Indicates a framework class
- A singleton framework class. *See the singleton flag for more information
- A component-type framework class (any class within the Ext JS framework that extends Ext.Component)
- Indicates that the class, member, or guide is new in the currently viewed version
- Indicates a class member of type config
Or in the case of an ExtReact component class this
indicates a member of type prop
- Indicates a class member of type property
- Indicates a class member of type
method
- Indicates a class member of type event
- Indicates a class member of type
theme variable
- Indicates a class member of type
theme mixin
- Indicates that the class, member, or guide is new in the currently viewed version
Just below the class name on an API doc page is a row of buttons corresponding to the types of members owned by the current class. Each button shows a count of members by type (this count is updated as filters are applied). Clicking the button will navigate you to that member section. Hovering over the member-type button will reveal a popup menu of all members of that type for quick navigation.
Getting and setter methods that correlate to a class config option will show up in the methods section as well as in the configs section of both the API doc and the member-type menus just beneath the config they work with. The getter and setter method documentation will be found in the config row for easy reference.
ExtReact component classes do not hoist the getter /
setter methods into the prop. All methods will be described in the
Methods section
Your page history is kept in localstorage and displayed (using the available real estate) just below the top title bar. By default, the only search results shown are the pages matching the product / version you're currently viewing. You can expand what is displayed by clicking on the button on the right-hand side of the history bar and choosing the "All" radio option. This will show all recent pages in the history bar for all products / versions.
Within the history config menu you will also see a listing of your recent page visits. The results are filtered by the "Current Product / Version" and "All" radio options. Clicking on the button will clear the history bar as well as the history kept in local storage.
If "All" is selected in the history config menu the checkbox option for "Show product details in the history bar" will be enabled. When checked, the product/version for each historic page will show alongside the page name in the history bar. Hovering the cursor over the page names in the history bar will also show the product/version as a tooltip.
Both API docs and guides can be searched for using the search field at the top of the page.
On API doc pages there is also a filter input field that filters the member rows using the filter string. In addition to filtering by string you can filter the class members by access level, inheritance, and read only. This is done using the checkboxes at the top of the page.
The checkbox at the bottom of the API class navigation tree filters the class list to include or exclude private classes.
Clicking on an empty search field will show your last 10 searches for quick navigation.
Each API doc page (with the exception of Javascript primitives pages) has a menu view of metadata relating to that class. This metadata view will have one or more of the following:
Ext.button.Button class has an alternate class name of Ext.Button). Alternate class
names are commonly maintained for backward compatibility.Runnable examples (Fiddles) are expanded on a page by default. You can collapse and expand example code blocks individually using the arrow on the top-left of the code block. You can also toggle the collapse state of all examples using the toggle button on the top-right of the page. The toggle-all state will be remembered between page loads.
Class members are collapsed on a page by default. You can expand and collapse members using the arrow icon on the left of the member row or globally using the expand / collapse all toggle button top-right.
Viewing the docs on narrower screens or browsers will result in a view optimized for a smaller form factor. The primary differences between the desktop and "mobile" view are:
The class source can be viewed by clicking on the class name at the top of an API doc page. The source for class members can be viewed by clicking on the "view source" link on the right-hand side of the member row.
A Schema is a collection of related Ext.data.Model and their respective Ext.data.schema.Association.
By default a single instance of this class is created which serves as the schema for all
entities that do not have an explicit schema config
either specified or inherited. This is sufficient in most cases.
When an entity does specify a schema, however, that
looks up (or creates) an instance for that entity class which is then inherited.
Important: All related entities must belong to a single schema instance in order to properly link up their associations.
The best way to control the configuration of your schema is to define a base class for
all of your entities and use the schema config like
this:
Ext.define('MyApp.model.Base', {
extend: 'Ext.data.Model',
// This configures the default schema because we don't assign an "id":
schema: {
// configs go here
}
});
Note: Only one explicit configuration can be applied to the default schema. In most applications this will not be an issue.
By using a base class for your entities you can ensure that the default schema is fully
configured before declaration of your classes proceeds. This is especially helpful if
you need to set the namespace for your schema (see below).
When describing associations between entities, it is desirable to use shorthand names
that do not contain the common namespace portion. This is called the entityName as
opposed to its class name. By default, the entityName is the full class name. However,
if a namespace is used, the common portion can be discarded and we can derive a shorter name.
In the following code, "MyApp.model.Foo" has an entityName of "Foo" and the schema has
a namespace of "MyApp.model".
If you use deeper nesting for entities, you may need to set the namespace config to
account for this. For example:
Ext.define('MyApp.model.Base', {
extend: 'Ext.data.Model',
schema: {
namespace: 'MyApp.model'
}
});
Your derived classes now will generate proper default entityName values even if they
have further namespaces. For example, "MyApp.model.foo.Thing" will produce "foo.Thing"
as the entityName given the above as a base class.
There are various terms involved when describing associations. Perhaps the simplest example that will clarify these terms is that of the common many-to-many association of User and Group.
entityName - The names "User" and "Group" are the entityName values associated
with these two classes. These are derived from their full classnames (perhaps
something like "App.model.User" and "App.model.Group").
associationName - When talking about associations, especially the many-to-many
variety, it is important to give them names. Associations are not owned by either of
the entities involved, so this name is similar to an entityName. In the case of
"User" and "Group", the default associationName would be "GroupUsers".
left and right - Associations describe a relationship between two entities. To
talk about specific associations we would use the entityName of the parties (such
as "User" or "Group"). When discussing associations in the abstract, however, it is
very helpful to be able to talk about the entities in an association in a general way.
In the case of the "GroupUsers" association, "User" is said to be the left while
"Group" is said to be the right. In a many-to-many association the selection of
left and right is arbitrary. When a foreign-key is involved, the left entity
is the one containing the foreign-key.
One of the jobs the the Schema is to manage name generation (such as entityName).
This job is delegated to a class called the namer. If you need to generate names in
other ways, you can provide a custom namer for your classes:
Ext.define('MyApp.model.Base', {
extend: 'Ext.data.Model',
schema: {
namespace: 'MyApp.model',
namer: 'custom'
}
});
This will create a class using the alias "namer.custom". For example:
Ext.define('MyApp.model.CustomNamer', {
extend: 'Ext.data.schema.Namer',
alias: 'namer.custom',
...
});
For details see the documentation for Ext.data.schema.Namer.
This config is used to initialize the Ext.data.Model#identifier config
for classes that do not define one.
Sets the value of defaultIdentifier
defaultIdentifier : Object
Specifies or configures the name generator for the schema.
Defaults to:
"default"
This is a template used to produce Ext.data.proxy.Proxy configurations for
Models that do not define an explicit proxy.
This template is processed with the Model class as the data object which means any static properties of the Model are available. The most useful of these are
If this property is specified by the target class of this mixin its properties are
used to configure the created Ext.Factory.
Returns an Association by name.
name : String
The name of the association.
The association instance.
Returns an entity by name.
name : String
The name of the entity
The entity class.
Get the entity name taking into account the namespace.
cls : String/Ext.data.Model
The model class or name of the class.
The entity name
Checks if the passed entity has attached associations that need to be read when using nested loading.
name : String/Ext.Class/Ext.data.Model
The name, instance, or Model class.
true if there are associations attached to the entity.
Checks if an entity is defined
entity : String/Ext.data.Model
The name or model
True if this entity is defined
Returns the Schema instance given its id or config object. If only the id
is specified, that Schema instance is looked up and returned. If there is no
instance already created, the id is assumed to be the type. For example:
schema: 'foo'
Would be created from the alias "schema.foo" and assigned the id of "foo"
as well.
config : String/Object
The id, type or config object of the schema.
type : String (optional)
The type alias of the schema. A "schema." prefix
is added to this string, if provided, to complete the alias. This should match
match the "alias" of some class derived from Ext.data.schema.Schema.
The previously existing or newly created instance.
Override members of this class. Overridden methods can be invoked via Ext.Base#callParent.
Ext.define('My.Cat', {
constructor: function() {
alert("I'm a cat!");
}
});
My.Cat.override({
constructor: function() {
alert("I'm going to be a cat!");
this.callParent(arguments);
alert("Meeeeoooowwww");
}
});
var kitty = new My.Cat(); // alerts "I'm going to be a cat!"
// alerts "I'm a cat!"
// alerts "Meeeeoooowwww"
Direct use of this method should be rare. Use Ext.define instead:
Ext.define('My.CatOverride', {
override: 'My.Cat',
constructor: function() {
alert("I'm going to be a cat!");
this.callParent(arguments);
alert("Meeeeoooowwww");
}
});
The above accomplishes the same result but can be managed by the Ext.Loader which can properly order the override and its target class and the build process can determine whether the override is needed based on the required state of the target class (My.Cat).
members : Object
The properties to add to this class. This should be specified as an object literal containing one or more properties.
this class
ExtReact | Terms of Use